Baldor IDXM7170T Product Information Sheet

Product Information Packet

IDXM7170T

10HP,1760RPM,3PH,60HZ,215TC,0748M,XPFC,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDXM7170T - 10HP,1760RPM,3PH,60HZ,215TC,0748M,XPFC,F

Part Detail

Revision: Q Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGX776 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07H517 Layout: 07LYH517 Poles: 04 Created Date: 02-16-2006
Base: RG Eff. Date: 07-11-2019 Leads: 9#14 Y

Specs

Catalog Number: IDXM7170T
Enclosure: XPFC
Frame: 215TC
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

208.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: CLI GP D
XP Division: Division I
Agency Approvals: UR

UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Duty
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X0748M
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Bearing Grease Type: Polyrex EM (-20F +300F)

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: IDXM7170T - 10HP,1760RPM,3PH,60HZ,215TC,0748M,XPFC,F

Blower: None
Constant Torque Speed Range: 30
Current @ Voltage: 25.000 A @ 230.0 V

26.300 A @ 208.0 V

12.500 A @ 460.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T2B

Page 3 of 10