Baldor IDXM7142T Product Information Sheet

Product Information Packet

IDXM7142T

3HP,1755RPM,3PH,60HZ,182TC,0632M,XPFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDXM7142T - 3HP,1755RPM,3PH,60HZ,182TC,0632M,XPFC,F1

Part Detail

Revision: M Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 06WGX181 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 06J010 Layout: 06LYJ010 Poles: 04 Created Date: 12-08-2010
Base: RG Eff. Date: 04-26-2017 Leads: 9#16

Specs

Catalog Number: IDXM7142T
Enclosure: XPFC
Frame: 182TC
Frame Material: Iron
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D
XP Division: Division I
Agency Approvals: UR

UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Inverter Duty
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X0632M
Mounting Arrangement: F1
Power Factor: 77
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: IDXM7142T - 3HP,1755RPM,3PH,60HZ,182TC,0632M,XPFC,F1

Constant Torque Speed Range: 30
Current @ Voltage: 4.100 A @ 460.0 V

8.200 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T2B

Page 3 of 10