Baldor IDXM7054T Product Information Sheet

Product Information Packet

IDXM7054T

15HP,1765RPM,3PH,60HZ,254TC,0944M,XPFC,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDXM7054T - 15HP,1765RPM,3PH,60HZ,254TC,0944M,XPFC,F

Part Detail

Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGZ910 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 09E963 Layout: 09LYE963 Poles: 04 Created Date: 06-02-2015
Base: RG Eff. Date: 09-01-2017 Leads: 9#12

Specs

Catalog Number: IDXM7054T
Enclosure: XPFC
Frame: 254TC
Frame Material: Iron
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D
XP Division: Division I
Agency Approvals: UR

CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Duty
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X0944M
Mounting Arrangement: F1
Power Factor: 83
Product Family: Hazardous Location Motor
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: IDXM7054T - 15HP,1765RPM,3PH,60HZ,254TC,0944M,XPFC,F

Constant Torque Speed Range: 30
Current @ Voltage: 18.100 A @ 460.0 V

36.200 A @ 230.0 V

38.000 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T2B

Page 3 of 10