Baldor IDXM7034T Product Information Sheet

Product Information Packet

IDXM7034T

1.5HP,1760RPM,3PH,60HZ,145TC,3526M,XPFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDXM7034T - 1.5HP,1760RPM,3PH,60HZ,145TC,3526M,XPFC

Part Detail

Revision: H Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGM493 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35N256 Layout: 35LYN256 Poles: 04 Created Date: 11-04-2013
Base: RG Eff. Date: 12-27-2018 Leads: 9#18

Specs

Catalog Number: IDXM7034T
Enclosure: XPFC
Frame: 145TC
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: UR

CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Inverter Duty
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3526M
Mounting Arrangement: F1
Power Factor: 73
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: IDXM7034T - 1.5HP,1760RPM,3PH,60HZ,145TC,3526M,XPFC

Constant Torque Speed Range: 6
Current @ Voltage: 2.200 A @ 460.0 V

4.400 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10