Baldor IDWNM22938T Product Information Sheet

Product Information Packet

IDWNM22938T

10HP,1765RPM,3PH,60HZ,254TC,3956M,TENV

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDWNM22938T - 10HP,1765RPM,3PH,60HZ,254TC,3956M,TENV

Part Detail

Revision: AG Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 39WGW632 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 39R099 Layout: 39LYR099 Poles: 04 Created Date:
Base: RG Eff. Date: 09-01-2017 Leads: 9#12

Specs

Catalog Number: IDWNM22938T
Enclosure: TENV
Frame: 254TC
Frame Material: Steel
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: H
Inverter Code: Inverter Duty
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3956M
Mounting Arrangement: F1
Power Factor: 85
Product Family: Wash Down
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Current @ Voltage: 12.000 A @ 460.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: IDWNM22938T - 10HP,1765RPM,3PH,60HZ,254TC,3956M,TENV

24.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Encoder/Feedback Device
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10