Baldor IDM4115T Product Information Sheet

Product Information Packet

IDM4115T

72M 4P TEBC HOR 326T INV DUTY TSTATS

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDM4115T - 72M 4P TEBC HOR 326T INV DUTY TSTATS

Part Detail

Revision: A Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 12WGY141 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 12T107 Layout: 12LYT107 Poles: 04 Created Date: 03-19-2019
Base: RG Eff. Date: 09-16-2019 Leads: 9#8

Specs

Catalog Number: IDM4115T
Enclosure: TEBC
Frame: 326T
Frame Material: Iron
Output @ Frequency: 50.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: BLOWER

Inverter Code: Inverter Duty
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 8 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1272M
Mounting Arrangement: F1
Power Factor: 85
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Current @ Voltage: 116.000 A @ 230.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 12

Product Information Packet: IDM4115T - 72M 4P TEBC HOR 326T INV DUTY TSTATS

58.000 A @ 460.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 12

Product Information Packet: IDM4115T - 72M 4P TEBC HOR 326T INV DUTY TSTATS

Nameplate NP1163L

CAT NO IDM4115T

SPEC. 12T107Y141G1

FRAME 326T HP 50 TE

VOLTS 230/460

MAG CUR 40/20 FLA 116/58

RPM 1775 RPM MAX 3900

HZ 60 PH 3 CLASS H

SER.F. 1.00 DES A SL HZ 0.83

NEMA-NOM-EFF 94.5 WK2 9.59

BLWR V PH HZ A
RATING 40C AMB-CONT
DE BRG 6312 ODE BRG 6311

CC 010A SN

Page 4 of 12