Baldor IDM3661T-5 Product Information Sheet
Product Information Packet
IDM3661T-5
3HP,1755RPM,3PH,60HZ,184TC,0632M,TEBC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: IDM3661T-5 - 3HP,1755RPM,3PH,60HZ,184TC,0632M,TEBC,F1
Part Detail
Revision: G Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 06WGX319 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 06F552 Layout: 06LYF552 Poles: 04 Created Date: 10-10-2011
Base: RG Eff. Date: 04-14-2016 Leads: 3#16
Specs
Catalog Number: IDM3661T-5
Enclosure: TEBC
Frame: 184TC
Frame Material: Iron
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: BLOWER
Current @ Voltage: 3.300 A @ 575.0 V
Inverter Code: Inverter Duty
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0632M
Mounting Arrangement: F1
Power Factor: 77
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Design Code: B
Shaft Rotation: Reversible: Connected Standard
Page 2 of 10
Product Information Packet: IDM3661T-5 - 3HP,1755RPM,3PH,60HZ,184TC,0632M,TEBC,F1
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Encoder/Feedback Device
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...