Baldor IDCSWDM3558 Product Information Sheet

Product Information Packet

IDCSWDM3558

2HP,1750RPM,3PH,60HZ,56C,3528M,TEFC,F1,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: IDCSWDM3558 - 2HP,1750RPM,3PH,60HZ,56C,3528M,TEFC,F1,N

Part Detail

Revision: W Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGP562 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35S641 Layout: 35LYS641 Poles: 04 Created Date: 08-12-2010
Base: RG Eff. Date: 08-12-2019 Leads: 9#18

Specs

Catalog Number: IDCSWDM3558
Enclosure: TEFC
Frame: 56C
Frame Material: Stainless Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Inverter Duty
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3528M
Mounting Arrangement: F1
Power Factor: 75
Product Family: Wash Down Paint Free
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Current @ Voltage: 2.900 A @ 460.0 V

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: IDCSWDM3558 - 2HP,1750RPM,3PH,60HZ,56C,3528M,TEFC,F1,N

5.800 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H

Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10