Baldor HPM3615T Product Information Sheet

Product Information Packet

HPM3615T

5HP,1745RPM,3PH,60HZ,184TYZ,3634M,TEFC,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: HPM3615T - 5HP,1745RPM,3PH,60HZ,184TYZ,3634M,TEFC,F

Part Detail

Revision: G Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS543 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36L541 Layout: 36LYL541 Poles: 04 Created Date: 08-30-2010
Base: RG Eff. Date: 04-20-2017 Leads: 9#16

Specs

Catalog Number: HPM3615T
Enclosure: TEFC
Frame: 184TYZ
Frame Material: Steel
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3634M
Mounting Arrangement: F3
Power Factor: 78
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: 4-Bolt Pump Mount
Pulley Shaft Indicator: Bored & Key
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: HPM3615T - 5HP,1745RPM,3PH,60HZ,184TYZ,3634M,TEFC,F

Current @ Voltage: 13.600 A @ 230.0 V

14.200 A @ 208.0 V

6.800 A @ 460.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10