Baldor HM3112 Product Information Sheet

Product Information Packet

HM3112

.75HP,1725RPM,3PH,60HZ,56,3420M,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: HM3112 - .75HP,1725RPM,3PH,60HZ,56,3420M,OPEN,F1

Part Detail

Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG0883 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34F494 Layout: 34LYF494 Poles: 04 Created Date:
Base: RG Eff. Date: 04-16-2012 Leads: 9#18

Specs

Catalog Number: HM3112
Frame: 56
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ

208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 3.600 A @ 208.0 V

Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3420M
Mounting Arrangement: F1
Power Factor: 60
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None

3.200 A @ 208.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: HM3112 - .75HP,1725RPM,3PH,60HZ,56,3420M,OPEN,F1

3.000 A @ 230.0 V

1.500 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10