Baldor HIC264A Product Information Sheet

Product Information Packet

HIC264A

.33HP,1625RPM,1PH,60HZ,48Z,3414C,TEAO,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: HIC264A - .33HP,1625RPM,1PH,60HZ,48Z,3414C,TEAO,F1

Part Detail

Revision: J Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGR070 CD Diagram: CD0804A01 Mfg Plant:
Mech. Spec: 34M259 Layout: 34LYM259 Poles: 04 Created Date: 06-04-2013
Base: N Eff. Date: 03-30-2020 Leads: 9#18

Specs

Catalog Number: HIC264A
Enclosure: TEAO
Frame: 48Z
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: C
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 3414C
Mounting Arrangement: F1
Power Factor: 90
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Multiple Flats
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Current @ Voltage: 1.900 A @ 230.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: HIC264A - .33HP,1625RPM,1PH,60HZ,48Z,3414C,TEAO,F1

3.800 A @ 115.0 V
Design Code: ­Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Rotation: Reversible: Connected Standard
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: WG
Winding Thermal 2: None

Page 3 of 10