Baldor GDL3774T Product Information Sheet

Product Information Packet

GDL3774T

10HP,1740RPM,1PH,60HZ,215TZ,0748LC,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: GDL3774T - 10HP,1740RPM,1PH,60HZ,215TZ,0748LC,TEFC

Part Detail

Revision: D Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGY838 CD Diagram: CD1084 Mfg Plant:
Mech. Spec: 07N243 Layout: Poles: 04 Created Date: 03-18-2015
Base: RG Eff. Date: 07-16-2019 Leads: 2#10 A PH,2#14 B PH

Specs

Catalog Number: GDL3774T
Enclosure: TEFC
Frame: 215TZ
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 38.000 A @ 230.0 V

Inverter Code: Not Inverter
KVA Code: F
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 10 AWG, A PH
Motor Lead Exit: Cap Box
Motor Lead Termination: Flying Leads
Motor Type: 0748LC
Mounting Arrangement: F1
Power Factor: 98
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Design Code: L

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: GDL3774T - 10HP,1740RPM,1PH,60HZ,215TZ,0748LC,TEFC

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10