Baldor FSWDM3546-E Product Information Sheet

Product Information Packet

FSWDM3546-E

1HP,1760RPM,3PH,60HZ,56,3522M,TENV,F1,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: FSWDM3546-E - 1HP,1760RPM,3PH,60HZ,56,3522M,TENV,F1,N

Part Detail

Revision: C Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGW045 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E4927 Layout: 35LYE4927 Poles: 04 Created Date: 03-27-2018
Base: RG Eff. Date: 08-26-2019 Leads: 9#18

Specs

Catalog Number: FSWDM3546-E
Enclosure: TENV
Frame: 56
Frame Material: Stainless Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: H
Inverter Code: Inverter Ready
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Finish: UNPAINTED
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Termination: Flying Leads
Motor Type: 3522M
Mounting Arrangement: F1
Power Factor: 74
Product Family: WD All SS Encapsulated
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 1.500 A @ 460.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: FSWDM3546-E - 1HP,1760RPM,3PH,60HZ,56,3522M,TENV,F1,N

3.000 A @ 230.0 V

3.100 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10