Baldor EMVM3611C Product Information Sheet

Product Information Packet

EMVM3611C

2.2KW,1760RPM,3PH,60HZ,D100C,3632M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EMVM3611C - 2.2KW,1760RPM,3PH,60HZ,D100C,3632M,TEFC

Part Detail

Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS266 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36H178 Layout: 36LYH178 Poles: 04 Created Date: 05-11-2015
Base: N Eff. Date: 03-14-2019 Leads: 9#16

Specs

Catalog Number: EMVM3611C
Enclosure: TEFC
Frame: D100C
Frame Material: Steel
Output @ Frequency: 2.200 KW @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CE

CSA EEV
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3632M
Mounting Arrangement: B14
Power Factor: 75
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None

Current @ Voltage: 4.200 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: EMVM3611C - 2.2KW,1760RPM,3PH,60HZ,D100C,3632M,TEFC

8.400 A @ 230.0 V

9.000 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10