Baldor EMVM3550D Product Information Sheet

Product Information Packet

EMVM3550D

1.1KW,3500RPM,3PH,60HZ,D80D,3520M,TEFC,B

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EMVM3550D - 1.1KW,3500RPM,3PH,60HZ,D80D,3520M,TEFC,B

Part Detail

Revision: L Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGM760 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35Q176 Layout: 35LYQ176 Poles: 02 Created Date: 05-06-2015
Base: N Eff. Date: 07-30-2019 Leads: 9#18

Specs

Catalog Number: EMVM3550D
Enclosure: TEFC
Frame: D80D
Frame Material: Steel
Output @ Frequency: 1.100 KW @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3520M
Mounting Arrangement: B5
Power Factor: 85
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: D-Flange
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None

Blower: None

RoHS Status: ROHS COMPLIANT

Page 2 of 10

Product Information Packet: EMVM3550D - 1.1KW,3500RPM,3PH,60HZ,D80D,3520M,TEFC,B

Current @ Voltage: 1.900 A @ 460.0 V

3.800 A @ 230.0 V

4.000 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10