Baldor EMM3558 Product Information Sheet
Product Information Packet
EMM3558
1.5KW,1755RPM,3PH,60HZ,D90L,3528M,TEFC,B
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EMM3558 - 1.5KW,1755RPM,3PH,60HZ,D90L,3528M,TEFC,B
Part Detail
Revision: L Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGN909 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35Q920 Layout: 35LYQ920 Poles: 04 Created Date: 06-21-2013
Base: RG Eff. Date: 02-19-2019 Leads: 9#18 Y
Specs
Catalog Number: EMM3558
Enclosure: TEFC
Frame: D90L
Frame Material: Steel
Output @ Frequency: 1.500 KW @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
WEEE
CSA
CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3528M
Mounting Arrangement: B3
Power Factor: 75
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
RoHS Status: ROHS COMPLIANT
Page 2 of 10
Product Information Packet: EMM3558 - 1.5KW,1755RPM,3PH,60HZ,D90L,3528M,TEFC,B
Blower: None
Current @ Voltage: 2.900 A @ 460.0 V
5.800 A @ 208.0 V
5.800 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...