Baldor EM7062T-I-5 Product Information Sheet
Product Information Packet
EM7062T-I-5
40HP,1775RPM,3PH,60HZ,324T,1254M,XPFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM7062T-I-5 - 40HP,1775RPM,3PH,60HZ,324T,1254M,XPFC,F1
Part Detail
Revision: Z Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 12WGY285 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 12S077 Layout: 12LYS077 Poles: 04 Created Date: 06-28-2010
Base: RG Eff. Date: 03-09-2020 Leads: 3#8
Specs
Catalog Number: EM7062T-I-5
Enclosure: XPFC
Frame: 324T
Frame Material: Iron
Output @ Frequency: 40.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: CLI GP C,D
XP Division: Division I
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 39.000 A @ 575.0 V
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 8 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X1254M
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Design Code: A
Shaft Slinger Indicator: Shaft Slinger
Page 2 of 10
Product Information Packet: EM7062T-I-5 - 40HP,1775RPM,3PH,60HZ,324T,1254M,XPFC,F1
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10
Loading...