Baldor EM7053T-I-5 Product Information Sheet
Product Information Packet
EM7053T-I-5
15HP,3530RPM,3PH,60HZ,254T,0934M,XPFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM7053T-I-5 - 15HP,3530RPM,3PH,60HZ,254T,0934M,XPFC,F1
Part Detail
Revision: R Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGT021 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 09F369 Layout: 09LYF369 Poles: 02 Created Date: 11-20-2013
Base: RG Eff. Date: 03-09-2020 Leads: 3#12
Specs
Catalog Number: EM7053T-I-5
Enclosure: XPFC
Frame: 254T
Frame Material: Iron
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: CLI GP C,D
XP Division: Division I
Agency Approvals: UL
UR
CSA EEV
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X0934M
Mounting Arrangement: F1
Power Factor: 88
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Blower: None
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: EM7053T-I-5 - 15HP,3530RPM,3PH,60HZ,254T,0934M,XPFC,F1
Current @ Voltage: 13.700 A @ 575.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10
Loading...