Baldor EM7026T-I Product Information Sheet

Product Information Packet

EM7026T-I

3//2HP,3450//2890RPM,3PH,60//50HZ,182T,3

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EM7026T-I - 3//2HP,3450//2890RPM,3PH,60//50HZ,182T,3

Part Detail

Revision: S Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS041 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36J694 Layout: 36LYJ694 Poles: 02 Created Date: 06-21-2010
Base: RG Eff. Date: 05-23-2017 Leads: 9#16

Specs

Catalog Number: EM7026T-I
Enclosure: XPFC
Frame: 182T
Frame Material: Steel
Output @ Frequency: 3.000 HP @ 60 HZ

2.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

190.0 V @ 50 HZ

460.0 V @ 60 HZ

380.0 V @ 50 HZ
XP Class and Group: CLI GP C,D
XP Division: Division I
Agency Approvals: UR

UL
CSA EEV
CSA

Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3622M
Mounting Arrangement: F1
Power Factor: 91
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard

Auxillary Box: No Auxillary Box

Pulley Shaft Indicator: Standard

Page 2 of 10

Product Information Packet: EM7026T-I - 3//2HP,3450//2890RPM,3PH,60//50HZ,182T,3

Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 8.000 A @ 208.0 V

7.400 A @ 230.0 V

6.000 A @ 190.0 V

3.700 A @ 460.0 V

3.000 A @ 380.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK

Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10