Baldor EM3714T-9 Product Information Sheet

Product Information Packet

EM3714T-9

10HP,1770RPM,3PH,60HZ,215T,3760M,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EM3714T-9 - 10HP,1770RPM,3PH,60HZ,215T,3760M,TEFC,F1

Part Detail

Revision: D Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGT851 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 37N852 Layout: 37LYN852 Poles: 04 Created Date: 04-09-2016
Base: RG Eff. Date: 07-24-2020 Leads: 9#14

Specs

Catalog Number: EM3714T-9
Enclosure: TEFC
Frame: 215T
Frame Material: Steel
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3760M
Mounting Arrangement: F1
Power Factor: 78
Product Family: WP Below Decks Marine Duty
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: EM3714T-9 - 10HP,1770RPM,3PH,60HZ,215T,3760M,TEFC,F1

Current @ Voltage: 13.100 A @ 460.0 V

26.200 A @ 230.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10