Baldor EM3714T-5G Product Information Sheet

Product Information Packet

EM3714T-5G

10HP,1770RPM,3PH,60HZ,215T,3752M,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EM3714T-5G - 10HP,1770RPM,3PH,60HZ,215T,3752M,TEFC,F1

Part Detail

Revision: R Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGS829 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 37J838 Layout: 37LYJ838 Poles: 04 Created Date: 02-09-2011
Base: RG Eff. Date: 09-06-2019 Leads: 3#14

Specs

Catalog Number: EM3714T-5G
Enclosure: TEFC
Frame: 215T
Frame Material: Steel
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Inverter Ready
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3752M
Mounting Arrangement: F1
Power Factor: 85
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: Shaft Grounding

Current @ Voltage: 9.600 A @ 575.0 V

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: EM3714T-5G - 10HP,1770RPM,3PH,60HZ,215T,3752M,TEFC,F1

Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10