Baldor EM3665T-8G Product Information Sheet
Product Information Packet
EM3665T-8G
5HP,1750RPM,3PH,60HZ,184T,0641M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM3665T-8G - 5HP,1750RPM,3PH,60HZ,184T,0641M,TEFC,F1
Part Detail
Revision: E Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 06WGX201 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 06G729 Layout: 06LYG729 Poles: 04 Created Date: 09-11-2013
Base: RG Eff. Date: 04-19-2017 Leads: 3#14
Specs
Catalog Number: EM3665T-8G
Enclosure: TEFC
Frame: 184T
Frame Material: Iron
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 200.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
CSA EEV
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0642M
Mounting Arrangement: F1
Power Factor: 79
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Current @ Voltage: 15.100 A @ 200.0 V
Shaft Ground Indicator: Shaft Grounding
Page 2 of 10
Product Information Packet: EM3665T-8G - 5HP,1750RPM,3PH,60HZ,184T,0641M,TEFC,F1
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...