Baldor EM3311T-8G Product Information Sheet

Product Information Packet

EM3311T-8G

7.5HP,1770RPM,3PH,60HZ,213T,3734M,OPSB,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EM3311T-8G - 7.5HP,1770RPM,3PH,60HZ,213T,3734M,OPSB,F

Part Detail

Revision: L Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGZ613 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 37J839 Layout: 37LYJ839 Poles: 04 Created Date: 03-14-2016
Base: RG Eff. Date: 07-18-2019 Leads: 3#12

Specs

Catalog Number: EM3311T-8G
Enclosure: OPSB
Frame: 213T
Frame Material: Steel
Output @ Frequency: 7.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 200.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

IP Rating: NONE
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3734M
Mounting Arrangement: F1
Power Factor: 77
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Current @ Voltage: 23.300 A @ 200.0 V

Shaft Ground Indicator: Shaft Grounding

Page 2 of 9

Product Information Packet: EM3311T-8G - 7.5HP,1770RPM,3PH,60HZ,213T,3734M,OPSB,F

Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H
Inverter Code: Inverter Ready

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9