Baldor EM3218TA Product Information Sheet
Product Information Packet
EM3218TA
5HP,1750RPM,3PH,60HZ,184T,3640M,OPSB,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM3218TA - 5HP,1750RPM,3PH,60HZ,184T,3640M,OPSB,F1
Part Detail
Revision: K Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS536 CD Diagram: CD0007 Mfg Plant:
Mech. Spec: 36H827 Layout: 36LYH827 Poles: 04 Created Date: 11-12-2010
Base: RG Eff. Date: 04-04-2019 Leads: 12#16
Specs
Catalog Number: EM3218TA
Enclosure: OPSB
Frame: 184T
Frame Material: Steel
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA EEV
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 12 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3640M
Mounting Arrangement: F1
Power Factor: 80
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Blower: None
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 10
Product Information Packet: EM3218TA - 5HP,1750RPM,3PH,60HZ,184T,3640M,OPSB,F1
Current @ Voltage: 13.200 A @ 230.0 V
14.000 A @ 208.0 V
6.600 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None
Page 3 of 10
Loading...