Baldor EM3154T-5G Product Information Sheet

Product Information Packet

EM3154T-5G

1.5HP,1755RPM,3PH,60HZ,145T,3522M,OPSB,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Page 2 of 10

Product Information Packet: EM3154T-5G - 1.5HP,1755RPM,3PH,60HZ,145T,3522M,OPSB,F

Part Detail

Revision: L Status: PRD/A Change #: Proprietary: No

Type: AC Elec. Spec: 35WGM945 CD Diagram: CD0006 Mfg Plant:

Mech. Spec: 35Z069 Layout: 35LYZ069 Poles: 04 Created Date: 09-10-2013

Base: RG Eff. Date: 06-10-2019 Leads: 3#18

Specs

Catalog Number: EM3154T-5G

Enclosure: OPSB

Frame: 145T

Frame Material: Steel

Output @ Frequency: 1.500 HP @ 60 HZ

Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ

Voltage @ Frequency: 575.0 V @ 60 HZ

XP Class and Group: None

XP Division: Not Applicable

Agency Approvals: CSA

CSA EEV

UR

Auxillary Box: No Auxillary Box

Auxillary Box Lead Termination: None

Base Indicator: Rigid

Bearing Grease Type: Polyrex EM (-20F +300F)

Blower: None

Current @ Voltage: 1.800 A @ 575.0 V

Inverter Code: Inverter Ready

KVA Code: L

Lifting Lugs: No Lifting Lugs

Locked Bearing Indicator: Locked Bearing

Motor Lead Quantity/Wire Size: 3 @ 18 AWG

Motor Lead Exit: Ko Box

Motor Lead Termination: Flying Leads

Motor Type: 3522M

Mounting Arrangement: F1

Power Factor: 72

Product Family: General Purpose

Pulley End Bearing Type: Ball

Pulley Face Code: Standard

Pulley Shaft Indicator: Standard

Rodent Screen: None

Shaft Extension Location: Pulley End

Shaft Ground Indicator: Shaft Grounding

Shaft Rotation: Reversible

Page 3 of 10

Product Information Packet: EM3154T-5G - 1.5HP,1755RPM,3PH,60HZ,145T,3522M,OPSB,F

Design Code: B

Drip Cover: No Drip Cover

Duty Rating: CONT

Electrically Isolated Bearing: Not Electrically Isolated

Feedback Device: NO FEEDBACK

Front Face Code: Standard

Front Shaft Indicator: None

Heater Indicator: No Heater

Insulation Class: H

Shaft Slinger Indicator: No Slinger

Speed Code: Single Speed

Motor Standards: NEMA

Starting Method: Direct on line

Thermal Device - Bearing: None

Thermal Device - Winding: None

Vibration Sensor Indicator: No Vibration Sensor

Winding Thermal 1: None

Winding Thermal 2: None