Baldor EM3116T-57 Product Information Sheet
Product Information Packet
EM3116T-57
1HP,1440RPM,3PH,50HZ,143T,3518M,OPSB,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM3116T-57 - 1HP,1440RPM,3PH,50HZ,143T,3518M,OPSB,F1
Part Detail
Revision: D Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGZ674 CD Diagram: CD0022 Mfg Plant:
Mech. Spec: 35BB101 Layout: 35LYBB101 Poles: 04 Created Date: 12-22-2015
Base: RG Eff. Date: 09-20-2019 Leads: 6#18
Specs
Catalog Number: EM3116T-57
Enclosure: OPSB
Frame: 143T
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 1500 RPM @ 50 HZ
Voltage @ Frequency: 400.0 V @ 50 HZ
230.0 V @ 50 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
WEEE
CSA
CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3518M
Mounting Arrangement: F1
Power Factor: 74
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Bearing Grease Type: Polyrex EM (-20F +300F)
Shaft Extension Location: Pulley End
Page 2 of 10
Product Information Packet: EM3116T-57 - 1HP,1440RPM,3PH,50HZ,143T,3518M,OPSB,F1
Blower: None
Current @ Voltage: 1.800 A @ 400.0 V
3.100 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...