Baldor EM30004 Product Information Sheet
Product Information Packet
EM30004
.25HP,1140RPM,3PH,60HZ,48,3416M,OPEN,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM30004 - .25HP,1140RPM,3PH,60HZ,48,3416M,OPEN,F1
Part Detail
Revision: C Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGR138 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34F002 Layout: 34LYF002 Poles: 06 Created Date: 10-03-2014
Base: RG Eff. Date: 02-23-2018 Leads: 9#18
Specs
Catalog Number: EM30004
Enclosure: OPEN
Frame: 48
Frame Material: Steel
Output @ Frequency: .250 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: N
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3416M
Mounting Arrangement: F1
Power Factor: 48
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Current @ Voltage: .700 A @ 460.0 V
Shaft Extension Location: Pulley End
Page 2 of 9
Product Information Packet: EM30004 - .25HP,1140RPM,3PH,60HZ,48,3416M,OPEN,F1
1.400 A @ 230.0 V
1.700 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 9
Loading...