Baldor EM30003 Product Information Sheet

Product Information Packet

EM30003

.25HP,1725RPM,3PH,60HZ,48,3413M,ODP,F1,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EM30003 - .25HP,1725RPM,3PH,60HZ,48,3413M,ODP,F1,N

Part Detail

Revision: E Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGR137 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34B051 Layout: 34LYB051 Poles: 04 Created Date: 02-27-2014
Base: RG Eff. Date: 02-22-2018 Leads: 9#18

Specs

Catalog Number: EM30003
Enclosure: ODP
Frame: 48
Frame Material: Steel
Output @ Frequency: .250 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3413M
Mounting Arrangement: F1
Power Factor: 62
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: .500 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 9

Product Information Packet: EM30003 - .25HP,1725RPM,3PH,60HZ,48,3413M,ODP,F1,N

1.000 A @ 230.0 V

1.300 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9