Baldor EM2402T Product Information Sheet
Product Information Packet
EM2402T
10HP,880RPM,3PH,60HZ,284T,1046M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM2402T - 10HP,880RPM,3PH,60HZ,284T,1046M,TEFC,F1
Part Detail
Revision: K Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 10WGZ392 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 10C151 Layout: 10LYC151 Poles: 08 Created Date: 04-06-2015
Base: RG Eff. Date: 09-13-2019 Leads: 9#10
Specs
Catalog Number: EM2402T
Enclosure: TEFC
Frame: 284T
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 900 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA EEV
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 10 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1046M
Mounting Arrangement: F1
Power Factor: 71
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Blower: None
Shaft Extension Location: Pulley End
Page 2 of 12
Product Information Packet: EM2402T - 10HP,880RPM,3PH,60HZ,284T,1046M,TEFC,F1
Current @ Voltage: 14.600 A @ 460.0 V
29.200 A @ 230.0 V
30.000 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 12
Product Information Packet: EM2402T - 10HP,880RPM,3PH,60HZ,284T,1046M,TEFC,F1
Nameplate NP2138L
CAT.NO. EM2402T P/N ENCLOSURE TEFC
SPEC. 10C151Z392G1 CC 010A FRAME 284T S/N
HP 10 CLASS F HZ 60
RPM 880 PH 3 DES B
VOLT 230/460 KVA-CODE H ODE BRG 6309 DE BRG 6311
AMP 29.2/14.6 USABLE AT 208V 30
RATING 40C AMB-CONT GREASE POLYREX EM
NEMA-NOM-EFF 89.5 PF 71 SER.F. 1.15
HTR-VOLTS HTR-AMPS
Page 4 of 12
Loading...