Baldor EM2238 Product Information Sheet
Product Information Packet
EM2238
10HP,1775RPM,3PH,60HZ,256U,0936M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EM2238 - 10HP,1775RPM,3PH,60HZ,256U,0936M,TEFC,F1
Part Detail
Revision: J Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGT049 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 09C111 Layout: 09LYC111 Poles: 04 Created Date: 02-21-2015
Base: RG Eff. Date: 02-27-2020 Leads: 9#12
Specs
Catalog Number: EM2238
Enclosure: TEFC
Frame: 256U
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA EEV
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Insulation Class: F
Inverter Code: Inverter Ready
IP Rating: NONE
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0936M
Mounting Arrangement: F1
Power Factor: 78
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Blower: None
Shaft Extension Location: Pulley End
Page 2 of 12
Product Information Packet: EM2238 - 10HP,1775RPM,3PH,60HZ,256U,0936M,TEFC,F1
Current @ Voltage: 13.000 A @ 460.0 V
26.000 A @ 230.0 V
27.000 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 12
Product Information Packet: EM2238 - 10HP,1775RPM,3PH,60HZ,256U,0936M,TEFC,F1
Nameplate NP1259L
CAT.NO. EM2238
SPEC. 09C111T049G1
HP 10
VOLTS 230/460
AMP 26/13
RPM 1775
FRAME 256U HZ 60 PH 3
SER.F. 1.15 CODE K DES A CL F
NEMA-NOM-EFF 91.7 PF 78
RATING 40C AMB-CONT
CC 010A USABLE AT 208V 27
DE 6309 ODE 6208
ENCL TEFC SN
Page 4 of 12
Loading...