Baldor EL1406T Product Information Sheet

Product Information Packet

EL1406T

3HP,3450RPM,1PH,60HZ,182T,3628LC,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EL1406T - 3HP,3450RPM,1PH,60HZ,182T,3628LC,OPEN,F1

Part Detail

Revision: Q Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS117 CD Diagram: CD0055 Mfg Plant:
Mech. Spec: 36E002 Layout: 36LYE002 Poles: 02 Created Date: 11-13-2008
Base: RG Eff. Date: 04-04-2019 Leads: 4#14 A PH,2#16 B PH

Specs

Catalog Number: EL1406T
Enclosure: OPEN
Frame: 182T
Frame Material: Steel
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 14 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3628LC
Mounting Arrangement: F1
Power Factor: 98
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: EL1406T - 3HP,3450RPM,1PH,60HZ,182T,3628LC,OPEN,F1

Current @ Voltage: 12.300 A @ 230.0 V

24.600 A @ 115.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10