Baldor EL11313A Product Information Sheet
Product Information Packet
EL11313A
1.5HP,3480RPM,1PH,60HZ,56H,3532LC,OPEN,F
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EL11313A - 1.5HP,3480RPM,1PH,60HZ,56H,3532LC,OPEN,F
Part Detail
Revision: E Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGL162 CD Diagram: CD0320 Mfg Plant:
Mech. Spec: 35E2890 Layout: 35LYE2890 Poles: 02 Created Date: 01-08-2015
Base: RG Eff. Date: 05-31-2018 Leads: 6#16,1#14 #4TH
Specs
Catalog Number: EL11313A
Enclosure: OPEN
Frame: 56H
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Current @ Voltage: 11.800 A @ 115.0 V
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3532LC
Mounting Arrangement: F1
Power Factor: 99
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
5.900 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 9
Product Information Packet: EL11313A - 1.5HP,3480RPM,1PH,60HZ,56H,3532LC,OPEN,F
7.800 A @ 208.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use Eve-Not Valiid
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
Page 3 of 9
Loading...