Baldor EL11308 Product Information Sheet

Product Information Packet

EL11308

.75HP,1140RPM,1PH,60HZ,56H,3530LC,OPEN,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EL11308 - .75HP,1140RPM,1PH,60HZ,56H,3530LC,OPEN,F

Part Detail

Revision: G Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGN667 CD Diagram: CD0055 Mfg Plant:
Mech. Spec: 35E007 Layout: 35LYE007 Poles: 06 Created Date: 09-30-2014
Base: RG Eff. Date: 08-21-2017 Leads: 6#18

Specs

Catalog Number: EL11308
Enclosure: OPEN
Frame: 56H
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

208.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3530LC
Mounting Arrangement: F1
Power Factor: 99
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 9

Product Information Packet: EL11308 - .75HP,1140RPM,1PH,60HZ,56H,3530LC,OPEN,F

Current @ Voltage: 3.100 A @ 230.0 V

3.500 A @ 208.0 V

6.200 A @ 115.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9