Baldor EHM4110T-5 Product Information Sheet
Product Information Packet
EHM4110T-5
40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EHM4110T-5 - 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1
Part Detail
Revision: S Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 12WGY285 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 12G122 Layout: 12LYG122 Poles: 04 Created Date: 12-05-2011
Base: RG Eff. Date: 09-16-2019 Leads: 3#8
Specs
Catalog Number: EHM4110T-5
Enclosure: TEFC
Frame: 324T
Frame Material: Iron
Output @ Frequency: 40.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
CSA EEV
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Inverter Ready
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 8 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1254M
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: Mounting Provisions Only
Current @ Voltage: 39.000 A @ 575.0 V
Shaft Rotation: Reversible
Page 2 of 11
Product Information Packet: EHM4110T-5 - 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 11
Product Information Packet: EHM4110T-5 - 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1
Nameplate NP2138L
CAT.NO. EHM4110T-5 P/N ENCLOSURE TEFC
SPEC. 12G122Y285G1 CC 010A FRAME 324T S/N
HP 40 CLASS F HZ 60
RPM 1775 PH 3 DES A
VOLT 575 KVA-CODE H ODE BRG 6311 DE BRG 6312
AMP 39 USABLE AT 208V
RATING 40C AMB-CONT GREASE POLYREX EM
NEMA-NOM-EFF 94.1 PF 82 SER.F. 1.15
HTR-VOLTS HTR-AMPS
Page 4 of 11
Loading...