Baldor EHM3218TA Product Information Sheet

Product Information Packet

EHM3218TA

5HP,1750RPM,3PH,60HZ,184T,3640M,OPSB,F3

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EHM3218TA - 5HP,1750RPM,3PH,60HZ,184T,3640M,OPSB,F3

Part Detail

Revision: N Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS536 CD Diagram: CD0007 Mfg Plant:
Mech. Spec: 36H650 Layout: 36LYH650 Poles: 04 Created Date: 07-09-2010
Base: RG Eff. Date: 04-08-2019 Leads: 12#16

Specs

Catalog Number: EHM3218TA
Enclosure: OPSB
Frame: 184T
Frame Material: Steel
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 12 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3640M
Mounting Arrangement: F3
Power Factor: 80
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: EHM3218TA - 5HP,1750RPM,3PH,60HZ,184T,3640M,OPSB,F3

Current @ Voltage: 13.200 A @ 230.0 V

14.000 A @ 208.0 V

6.600 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use Eve-Not Valiid
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None

Page 3 of 10