Baldor EHM2332T Product Information Sheet
Product Information Packet
EHM2332T
10HP,1180RPM,3PH,60HZ,256T,0960M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EHM2332T - 10HP,1180RPM,3PH,60HZ,256T,0960M,TEFC,F1
Part Detail
Revision: J Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGT193 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 09J970 Layout: 09LYJ970 Poles: 06 Created Date: 08-21-2015
Base: RG Eff. Date: 03-09-2020 Leads: 9#12
Specs
Catalog Number: EHM2332T
Enclosure: TEFC
Frame: 256T
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA EEV
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0960M
Mounting Arrangement: F1
Power Factor: 72
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Blower: None
Shaft Extension Location: Pulley End
Page 2 of 12
Product Information Packet: EHM2332T - 10HP,1180RPM,3PH,60HZ,256T,0960M,TEFC,F1
Current @ Voltage: 14.100 A @ 460.0 V
28.200 A @ 230.0 V
30.000 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: Mounting Provisions Only
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 12
Product Information Packet: EHM2332T - 10HP,1180RPM,3PH,60HZ,256T,0960M,TEFC,F1
Nameplate NP1259L
CAT.NO. EHM2332T
SPEC. 09J970T193G1
HP 10
VOLTS 230/460
AMP 28.2/14.1
RPM 1180
FRAME 256T HZ 60 PH 3
SER.F. 1.15 CODE H DES B CL F
NEMA-NOM-EFF 91 PF 72
RATING 40C AMB-CONT
CC 010A USABLE AT 208V 30
DE 6309 ODE 6208
ENCL TEFC SN
Page 4 of 12
Loading...