Baldor EFM3314T Product Information Sheet

Product Information Packet

EFM3314T

15HP,3475RPM,3PH,60HZ,215T,3734M,OPSB,F2

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: EFM3314T - 15HP,3475RPM,3PH,60HZ,215T,3734M,OPSB,F2

Part Detail

Revision: L Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGS867 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37B106 Layout: 37LYB106 Poles: 02 Created Date: 04-22-2013
Base: RG Eff. Date: 07-02-2019 Leads: 9#12

Specs

Catalog Number: EFM3314T
Enclosure: OPSB
Frame: 215T
Frame Material: Steel
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

CSA EEV

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3734M
Mounting Arrangement: F2
Power Factor: 89
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: EFM3314T - 15HP,3475RPM,3PH,60HZ,215T,3734M,OPSB,F2

Current @ Voltage: 17.500 A @ 460.0 V

35.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10