Baldor EBNM3546-D Product Information Sheet
Product Information Packet
EBNM3546-D
1HP,1745RPM,3PH,60HZ,56,3524M,TENV,F3,BR
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: EBNM3546-D - 1HP,1745RPM,3PH,60HZ,56,3524M,TENV,F3,BR
Part Detail
Revision: G Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGP560 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35X056 Layout: 35LYX056 Poles: 04 Created Date: 10-07-2015
Base: RG Eff. Date: 05-10-2019 Leads: 9#18
Specs
Catalog Number: EBNM3546-D
Enclosure: TENV
Frame: 56
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CE
CSA
CSA EEV
UR
WEEE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3524M
Mounting Arrangement: F3
Power Factor: 76
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Base Indicator: Rigid
Rodent Screen: None
Page 2 of 10
Product Information Packet: EBNM3546-D - 1HP,1745RPM,3PH,60HZ,56,3524M,TENV,F3,BR
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 3.000 A @ 208.0 V
2.900 A @ 230.0 V
1.450 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Brake Mounting
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...