Baldor DGC1307M Product Information Sheet

Product Information Packet

DGC1307M

.75HP,1625RPM,1PH,60HZ,56,3424C,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: DGC1307M - .75HP,1625RPM,1PH,60HZ,56,3424C,OPEN,F1

Part Detail

Revision: H Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGX924 CD Diagram: CD0696 Mfg Plant:
Mech. Spec: 34G313 Layout: 34LYG313 Poles: 04 Created Date:
Base: RS Eff. Date: 02-19-2010 Leads: 3#16

Specs

Catalog Number: DGC1307M
Frame: 56
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 7.900 A @ 115.0 V
Drip Cover: No Drip Cover
Duty Rating: INT
Electrically Isolated Bearing: Not Electrically Isolated

Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 16 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: Flying Leads
Motor Type: 3424C
Mounting Arrangement: F1
Power Factor: 97
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger

Feedback Device: NO FEEDBACK

Speed Code: Single Speed

Page 2 of 9

Product Information Packet: DGC1307M - .75HP,1625RPM,1PH,60HZ,56,3424C,OPEN,F1

Front Face Code: Resilient Mount
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: C

Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: SB

Page 3 of 9