Baldor DC Motors & Controls Catalog Page
DC Motors & Controls
SCR Drive Motors Shunt
5 thru 250 Hp NEMA L186AT thru 506AT
and Stabilized Shunt
Wound - DPFG, Self
Applications: Conveyors, plastic extruders, packaging machinery and other
constant torque applications for DC SCR motors.
Ventilated, Rigid Base
Features: Includes thermostat on interpole. Class F insulation system
resistant to dirt, carbon, dust and moisture. High dielectric stability. Low
moment of inertia armature for fast response. Constant pressure brush
springs and longer brushes for reduced maintenance. Includes grease fittings
and reliefs for bearing maintenance. Power code C and D or M-G sets.
Maximum RPM by field weakening. Provisions for tach mounting. (See tach
mounting kits on page 300). May be converted to blower ventilated (DPBV) for
extended constant torque speed range.
Voltage
Base/Max
Hp
Speed
5 1750/2300 L186AT
7 1/2 1750/2300
10 1750/2300 219AT
15 1750/2300 258AT
20 1750/2300 259AT
25 1750/2300
30 1750/2300 288AT
40 1750/2100 328AT 500 150/300 67.9 2.17 D5040P 13156 N2 819 TKP1836XP FVB6320 2,20
50 1750/2100 328AT 500 150/300 83.7 2 D5050P 14992 N2 822 TKP1836XP FVB6320 2,20
60 1750/2100 365-6AT 500 150/300 98.6 1.75 D5060P 17161 N2 815 TKP1836XP FVB6400 2,20
75 1750/2100 366AT 500 150/300 123 1.48 D5075P 20160 N2 959 TKP1836XP FVB6400 2,20
100 1750/2000 368AT 500 150/300 158 3 D50100P 25291 N2 1118 TKP1836XP FVB6400 2,20
125 1750/2000 407AT 500 150/300 200 3 D50125P 29950 N2 1459 TKP400XP FVB6400 2,20
150 1750/2000 409AT 500 150/300 237 3.7 D50150P 36034 N2 1139 TKP400XP FVB6400 2,20
200 1750/1900 504AT 500 150/300 320 3.9 D50200P 45701 N2 2149 TKP500XP FVB8500 2,20
250 1750/1900 506AT 500 150/300 392 5 D50250P 56195 N2 2569 TKP500XP FVB8500 2,20
NOTES:
(a)
DPFG enclosure is self-ventilated. Speed can be reduced to approximately 60% of base speed with constant torque.
See performance data in CA608 catalog for specific speed-torque curves. Separate blower can be used to increase operating range below 60% of base speed.
(b)
Field amps are for 150V connection on 240VDC motors; 300V connection on 500VDC motors. 360, 400 & 500 frames are 4 pole stabilized shunt until 3rd quarter 2006
when they became shunt. Others are 2 pole shunt.
(c)
Does not include price of blower. See page 300 for pricing.
(d)
Does not include weight of blower. See page 300 for weights.
(e)
See notes on inside back flap and pages 5-6.
180 frame motors are supplied without external conduit box, see online layout drawing for details.
NEMA
(a)
Frame
1810AT 240 150/300 28.1 .8 D2007P 5223 N2 239 TKP1836XP FVB3180 2,20
218AT 500 150/300 13.2 .69 D5007P 5223 N2 239 TKP1836XP FVB3210 2,20
288AT 240 150/300 89.2 2.99 D2025P 9690 N2 589 TKP1836XP FVB4280 2,20
287-8AT 500 150/300 43.4 1.64 D5025P 9690 N2 529 TKP1836XP FVB4280 2,20
D.C.
Arm. Field
240 150/300 17.7 .68 D2005P 4330 N2 178 TKP1836XP FVB3180 2,20
500 150/300 8.5 .6 D5005P 4330 N2 179 TKP1836XP FVB3180 2,20
240 150/300 36.6 2.16 D2010P 5952 N2 259 TKP1836XP FVB3210 2,20
500 150/300 17.2 1.17 D5010P 5952 N2 269 TKP1836XP FVB3210 2,20
240 150/300 55 2.58 D2015P 7161 N2 379 TKP1836XP FVB3250 2,20
500 150/300 25.2 1.4 D5015P 7161 N2 379 TKP1836XP FVB3250 2,20
240 150/300 70.5 2.48 D2020P 8210 N2 429 TKP1836XP FVB3250 2,20
500 150/300 35.1 1.24 D5020P 8210 N2 429 TKP1836XP FVB3250 2,20
240 150/300 106 4.52 D2030P 10662 N2 589 TKP1836XP FVB4280 2,20
500 150/300 50 2 D5030P 10662 N2 579 TKP1836XP FVB4280 2,20
Full Load
Amperage
Arm. Field
Catalog
Number
(b)
List
Price
Motors
Only
Mult.
Sym.
(c)
Ap’x.
Shpg.
Wgt.
XPY
Tach
(d)
Kit
Blower
Catalog
Number
Notes
HVAC MotorsFarm Duty
Motors
Motors
Definite Purpose
(e)
Brake Motors200 & 575 Volt
Motors
Motors
IEC Frame
Motors
50 Hertz
Inverter/Vector
Motors & Controls
DC Motors
Soft Start &
297
and Controls
Dynamic Brakes
Loading...