Baldor CWDM41906T Product Information Sheet

Product Information Packet

CWDM41906T

20HP,3525RPM,3PH,60HZ,256TC,3948M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CWDM41906T - 20HP,3525RPM,3PH,60HZ,256TC,3948M,TEFC

Part Detail

Revision: AD Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 39WGW846 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 39R098 Layout: 39LYR098 Poles: 02 Created Date:
Base: RG Eff. Date: 12-26-2014 Leads: 9#10

Specs

Catalog Number: CWDM41906T
Enclosure: TEFC
Frame: 256TC
Output @ Frequency: 20.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 22.700 A @ 460.0 V

45.400 A @ 230.0 V

Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 10 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3948M
Mounting Arrangement: F1
Power Factor: 90
Product Family: Wash Down
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

50.000 A @ 208.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: CWDM41906T - 20HP,3525RPM,3PH,60HZ,256TC,3948M,TEFC

Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10