Baldor CWDM22976T Product Information Sheet
Product Information Packet
CWDM22976T
7.5HP,1175RPM,0PH,60HZ,254,TC,TEFC,F1,N
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: CWDM22976T - 7.5HP,1175RPM,0PH,60HZ,254,TC,TEFC,F1,N
Part Detail
Revision: L Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 39WGX513 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 39R098 Layout: 39LYR098 Poles: 06 Created Date: 08-31-2005
Base: RG Eff. Date: 11-30-2009 Leads: 9#12
Specs
Catalog Number: CWDM22976T
Enclosure: TEFC
Frame: 254TC
Frame Material: Steel
Output @ Frequency: 7.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3940M
Mounting Arrangement: F1
Power Factor: 73
Product Family: Wash Down
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Current @ Voltage: 11.200 A @ 460.0 V
Shaft Extension Location: Pulley End
Page 2 of 9
Product Information Packet: CWDM22976T - 7.5HP,1175RPM,0PH,60HZ,254,TC,TEFC,F1,N
22.400 A @ 230.0 V
23.400 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Page 3 of 9
Loading...