Baldor CP4111T-4 Product Information Sheet

Page 1
Product Information Packet
CP4111T-4
25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Page 2
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Part Detail
Revision: H Status: INA/A Change #: Proprietary: No Type: AC Elec. Spec: 10WGY139 CD Diagram: CD0006 Mfg Plant: Mech. Spec: 10F481 Layout: 10LYF481 Poles: 06 Created Date: 12-14-2005 Base: RG Eff. Date: 02-16-2010 Leads: 3#10
Specs
Catalog Number: CP4111T-4 Enclosure: TEFC Frame: 324T Frame Material: Iron Output @ Frequency: 25.000 HP @ 60 HZ Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ Voltage @ Frequency: 460.0 V @ 60 HZ XP Division: Not Applicable Agency Approvals: UR
CSA Auxillary Box: No Auxillary Box Auxillary Box Lead Termination: None Base Indicator: Rigid Bearing Grease Type: Polyrex EM (-20F +300F) Blower: None Current @ Voltage: 33.000 A @ 460.0 V Design Code: A
Inverter Code: Not Inverter KVA Code: H Lifting Lugs: Standard Lifting Lugs Locked Bearing Indicator: Locked Bearing Motor Lead Quantity/Wire Size: 3 @ 10 AWG Motor Lead Exit: Ko Box Motor Lead Termination: Flying Leads Motor Type: 1060M Mounting Arrangement: F1 Power Factor: 78 Product Family: Chemical Processing (Not DC) Pulley End Bearing Type: Ball Pulley Face Code: Standard Pulley Shaft Indicator: Standard Rodent Screen: None Shaft Extension Location: Pulley End Shaft Ground Indicator: No Shaft Grounding
Drip Cover: No Drip Cover
Shaft Rotation: Reversible
Page 3
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Duty Rating: CONT Electrically Isolated Bearing: Not Electrically Isolated Feedback Device: NO FEEDBACK Front Face Code: Standard Front Shaft Indicator: None Heater Indicator: No Heater Insulation Class: F
Shaft Slinger Indicator: Shaft Slinger Speed Code: Single Speed Motor Standards: NEMA Starting Method: Direct on line Thermal Device - Bearing: None Thermal Device - Winding: None Vibration Sensor Indicator: No Vibration Sensor
Page 4
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Accessories
Part Number Description Multiplier 10-1304 C FACE KIT A8
Page 5
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
AC Induction Motor Performance Data
Record # 20899 - Typical performance - not guaranteed values
Winding: 10WGY139-R001 Type: 1060M Enclosure: TEFC
Nameplate Data
460 V, 60 Hz:
Single Voltage Motor Rated Output (HP) 25 Full Load Torque 110 LB-FT Volts 460 Start Configuration direct on line Full Load Amps 33 Breakdown Torque 317 LB-FT R.P.M. 1180 Pull-up Torque 154 LB-FT Hz 60 Phase 3 Locked-rotor Torque 189 LB-FT NEMA Design Code A KVA Code H Starting Current 207 A Service Factor (S.F.) 1.15 No-load Current 15.2 A NEMA Nom. Eff. 91.7 Power Factor 78 LinelineRes.@25ºC 0.309Ω Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 62°C S.F. Amps Temp. Rise @ S.F. Load 73°C
Locked-rotor Power Factor 30
Rotor inertia 7.35 LB-FT2
Load Characteristics 460 V, 60 Hz, 25 HP
% of Rated Load 25 50 75 100 125 150 S.F. Power Factor 41 62 73 78 81 81 80 Efficiency 86.3 91 91.8 91.3 91.2 90.5 91.2 Speed 1194 1190 1185 1180 1175 1168 1177 Line amperes 16.8 20.7 26 32.4 39.8 47.8 36.8
Page 6
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Performance Graph at 460V, 60Hz, 25.0HP Typical performance - Not guaranteed values
Page 7
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Page 8
Product Information Packet: CP4111T-4 - 25HP,1180RPM,3PH,60HZ,324,T,1060M,TEFC,F
Loading...