Product Information Packet
CP2276T
7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
Part Detail
Revision: G Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGX825 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07H369 Layout: 07LYH369 Poles: 06 Created Date: 03-06-2006
Base: RG Eff. Date: 01-15-2010 Leads: 9#14
Specs
Catalog Number: CP2276T
Enclosure: TEFC
Frame: 254T
Frame Material: Iron
Output @ Frequency: 7.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0756M
Mounting Arrangement: F1
Power Factor: 72
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Current @ Voltage: 10.900 A @ 460.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 8
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
21.800 A @ 230.0 V
24.000 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 8
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
Accessories
Part Number Description Multiplier
K25G2 250 TEFC C-FACE KIT A8
Page 4 of 8
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
AC Induction Motor Performance Data
Record # 36500 - Typical performance - not guaranteed values
Winding: 07WGX825-R001 Type: 0756M Enclosure: TEFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 7.5 Full Load Torque 33.7 LB-FT
Volts 208-230/460 Start Configuration direct on line
Full Load Amps 24-21.8/10.9 Breakdown Torque 154 LB-FT
R.P.M. 1160 Pull-up Torque 70.5 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 98.9 LB-FT
NEMA Design Code A KVA Code K Starting Current 82.1 A
Service Factor (S.F.) 1.15 No-load Current 5.5 A
NEMA Nom. Eff. 89.5 Power Factor 72 LinelineRes.@25ºC 1.06Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 53°C
S.F. Amps Temp. Rise @ S.F. Load 65°C
Locked-rotor Power Factor 22
Rotor inertia 1.39 LB-FT2
Load Characteristics 460 V, 60 Hz, 7.5 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 35 55 66 72 74 77 73
Efficiency 84.8 89.3 90.1 89.8 88.6 86.1 89.1
Speed 1190 1181 1171 1160 1147 1132 1152
Line amperes 5.82 7.07 8.75 10.8 13.3 15.9 12.3
Page 5 of 8
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
Performance Graph at 460V, 60Hz, 7.5HP Typical performance - Not guaranteed values
Page 6 of 8
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
Page 7 of 8
Product Information Packet: CP2276T - 7.50HP,1175RPM,3PH,60HZ,254T,TEFC,FOOT
Page 8 of 8
Loading...