Product Information Packet
CM7174T
10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: CM7174T - 10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
Part Detail
Revision: R Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGW910 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07H272 Layout: 07LYH272 Poles: 02 Created Date:
Base: RG Eff. Date: 01-15-2010 Leads: 9#14
Specs
Catalog Number: CM7174T
Frame: 215TC
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
7.500 HP @ 50 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
3000 RPM @ 50 HZ
Voltage @ Frequency: 380.0 V @ 50 HZ
230.0 V @ 60 HZ
190.0 V @ 50 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0735M
Mounting Arrangement: F1
Power Factor: 90
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
RoHS Status: ROHS COMPLIANT
Page 2 of 7
Product Information Packet: CM7174T - 10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
Blower: None
Current @ Voltage: 23.200 A @ 230.0 V
21.600 A @ 190.0 V
11.600 A @ 460.0 V
10.800 A @ 380.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 7
Product Information Packet: CM7174T - 10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
AC Induction Motor Performance Data
Record # 36486 - Typical performance - not guaranteed values
Winding: 07WGW910-R013 Type: 0734M Enclosure: XPFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 10//7.5 Full Load Torque 14.99 LB-FT
Volts 230/460//190/380 Start Configuration direct on line
Full Load Amps 23.2/11.6//21.6/10.8 Breakdown Torque 75.95 LB-FT
R.P.M. 3480//2880 Pull-up Torque 31.7 LB-FT
Hz 60//50 Phase 3 Locked-rotor Torque 43.61 LB-FT
NEMA Design Code A KVA Code J Starting Current 102 A
Service Factor (S.F.) 1 No-load Current 3.72 A
NEMA Nom. Eff. 89.5 Power Factor 90 LinelineRes.@25ºC 0.818Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 52°C
Locked-rotor Power Factor 33.2
Rotor inertia 0.311 LB-FT2
Load Characteristics 460 V, 60 Hz, 10 HP
% of Rated Load 25 50 75 100 125 150
Power Factor 63 81 87 89 89 88
Efficiency 81.3 88 89.4 89.6 88.9 87.7
Speed 3571 3545 3515 3484 3451 3410
Line amperes 4.72 6.66 9.09 11.74 14.52 17.7
Page 4 of 7
Product Information Packet: CM7174T - 10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
Performance Graph at 460V, 60Hz, 10.0HP Typical performance - Not guaranteed values
Page 5 of 7
Product Information Packet: CM7174T - 10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
Page 6 of 7
Product Information Packet: CM7174T - 10HP,3600RPM,3PH,60HZ,L215TC,TEFC,FOOT,
Page 7 of 7
Loading...