Baldor CM7063T Product Information Sheet

Product Information Packet

CM7063T

25//20HP,3535/2935RPM,3PH,60/50HZ,284TSC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CM7063T - 25//20HP,3535/2935RPM,3PH,60/50HZ,284TSC

Part Detail

Revision: F Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 10WGY197 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 10E459 Layout: 10LYE459 Poles: 02 Created Date: 12-15-2006
Base: RG Eff. Date: 06-14-2010 Leads: 9#10

Specs

Catalog Number: CM7063T
Enclosure: TEFC
Frame: 284TSC
Frame Material: Iron
Output @ Frequency: 20.000 HP @ 50 HZ

25.000 HP @ 60 HZ

Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ

3000 RPM @ 50 HZ

Voltage @ Frequency: 230.0 V @ 60 HZ

190.0 V @ 50 HZ

460.0 V @ 60 HZ

380.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None

Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 10 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1036M
Mounting Arrangement: F1
Power Factor: 89
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard

Base Indicator: Rigid

Rodent Screen: None

Page 2 of 10

Product Information Packet: CM7063T - 25//20HP,3535/2935RPM,3PH,60/50HZ,284TSC

Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 62.000 A @ 208.0 V

57.000 A @ 230.0 V

56.000 A @ 190.0 V

28.500 A @ 460.0 V

28.000 A @ 380.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10