Baldor CM7034T Product Information Sheet
Product Information Packet
CM7034T
1.5//1HP,1755//1460RPM,3PH,60//50HZ,145T
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: CM7034T - 1.5//1HP,1755//1460RPM,3PH,60//50HZ,145T
Part Detail
Revision: E Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGZ541 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E377 Layout: 35LYE377 Poles: 04 Created Date: 12-11-2006
Base: RG Eff. Date: 10-15-2008 Leads: 9#18
Specs
Catalog Number: CM7034T
Enclosure: TEFC
Frame: 145TC
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 50 HZ
1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
1500 RPM @ 50 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
380.0 V @ 50 HZ
230.0 V @ 60 HZ
190.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3521M
Mounting Arrangement: F1
Power Factor: 70
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Base Indicator: Rigid
RoHS Status: ROHS COMPLIANT
Page 2 of 10
Product Information Packet: CM7034T - 1.5//1HP,1755//1460RPM,3PH,60//50HZ,145T
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 4.800 A @ 230.0 V
4.200 A @ 190.0 V
2.400 A @ 460.0 V
2.100 A @ 380.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10
Loading...