Baldor CM7010-57 Product Information Sheet

Product Information Packet

CM7010-57

.75HP,1425RPM,3PH,50HZ,56C,3428M,XPFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CM7010-57 - .75HP,1425RPM,3PH,50HZ,56C,3428M,XPFC,F1

Part Detail

Revision: P Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGY234 CD Diagram: CD0022 Mfg Plant:
Mech. Spec: 34-5331 Layout: 34LY5331 Poles: 04 Created Date: 09-07-2011
Base: RG Eff. Date: 01-06-2020 Leads: 6#18

Specs

Catalog Number: CM7010-57
Enclosure: XPFC
Frame: 56C
Frame Material: Steel
Output @ Frequency: .750 HP @ 50 HZ
Synchronous Speed @ Frequency: 1500 RPM @ 50 HZ
Voltage @ Frequency: 230.0 V @ 50 HZ

400.0 V @ 50 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: N
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3428M
Mounting Arrangement: F1
Power Factor: 61
Product Family: Hazardous Location Motor
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Current @ Voltage: 1.700 A @ 400.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: CM7010-57 - .75HP,1425RPM,3PH,50HZ,56C,3428M,XPFC,F1

2.900 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10