Baldor CM3708T Product Information Sheet

Product Information Packet

CM3708T

5HP,1155RPM,3PH,60HZ,215TC,3737M,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CM3708T - 5HP,1155RPM,3PH,60HZ,215TC,3737M,TEFC,F1

Part Detail

Revision: B Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGT922 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37G814 Layout: 37LYG814 Poles: 06 Created Date: 10-30-2006
Base: RG Eff. Date: 05-07-2009 Leads: 9#14

Specs

Catalog Number: CM3708T
Enclosure: TEFC
Frame: 215TC
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ

208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 15.000 A @ 230.0 V

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3737M
Mounting Arrangement: F1
Power Factor: 72
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

16.300 A @ 208.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: CM3708T - 5HP,1155RPM,3PH,60HZ,215TC,3737M,TEFC,F1

7.500 A @ 460.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10