Baldor CJM3006 Product Information Sheet

Product Information Packet

CJM3006

.33HP,3450RPM,3PH,60HZ,56J,3410M,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CJM3006 - .33HP,3450RPM,3PH,60HZ,56J,3410M,OPEN,F1

Part Detail

Revision: Q Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG5464 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34F088 Layout: 34LYF088 Poles: 02 Created Date:
Base: RG Eff. Date: 01-20-2010 Leads: 9#18

Specs

Catalog Number: CJM3006
Enclosure: ODP
Frame: 56J
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: .800 A @ 460.0 V

1.600 A @ 230.0 V

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: P
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: Flying Leads
Motor Type: 3410M
Mounting Arrangement: F1
Power Factor: 61
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
Shaft Extension Location: Pulley End

2.400 A @ 208.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: CJM3006 - .33HP,3450RPM,3PH,60HZ,56J,3410M,OPEN,F1

Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10